top of page
  • TNS Electrical Solutions

Troubleshooting Common Electrical Issues in Putney Homes: A DIY Guide By TNS Electrical Solutions

At TNS Electrical Solutions, electrician Putney, we understand the frustration that comes with electrical issues in your home. From flickering lights to faulty outlets, encountering electrical problems can disrupt your daily routine and pose safety hazards. However, many common issues can be resolved with some DIY troubleshooting before seeking professional help. Here's a comprehensive guide to help you address these electrical concerns effectively in your Putney, Wandsworth home.

Electrician Putney

Flickering Lights

Possible Causes

Flickering lights can result from various issues, such as loose bulbs, faulty wiring, or overloaded circuits. Begin by checking if the light bulbs are properly screwed in and if the problem persists, it could indicate a deeper wiring issue.

DIY Solution

First, turn off the light switch and carefully remove the bulb. Inspect the socket for any signs of damage or loose wiring. If everything seems intact, try using a different bulb. If the problem persists, it's advisable to contact a licensed electrician in Putney, like TNS Electrical Solutions, to examine the wiring and address any potential hazards.

Tripped Circuit Breaker

Potential Reasons

When your circuit breaker trips frequently, it signifies an overload or a short circuit in the electrical system. Overloading can occur due to using multiple high-power appliances on the same circuit or faulty wiring.

DIY Resolution

Locate the circuit breaker panel and check for any switches in the "off" position. Reset the breaker by turning it off and then on again. If it trips repeatedly, unplug appliances from the affected circuit and try resetting it. If the issue persists, it's essential to have a professional electrician inspect your electrical system to prevent any safety risks.

Dead Outlets

Probable Causes

Dead outlets are commonly caused by tripped circuit breakers, damaged wiring, or a faulty outlet itself. It's crucial to identify the root cause to avoid potential electrical hazards.


Firstly, check the circuit breaker to ensure the associated breaker isn't tripped. If the breaker is fine, test other outlets in the same room to determine if the issue is isolated. If multiple outlets are dead, it could indicate a wiring problem. Consider consulting a qualified electrician in Putney to safely diagnose and repair the issue.

Electrical Shocks

Potential Reasons

Experiencing an electrical shock when touching appliances or switches indicates a serious problem. It could be due to faulty wiring, damaged cords, or improper grounding.

DIY Action

Safety is paramount when dealing with electrical shocks. Immediately disconnect the power source and avoid touching the appliance. Inspect the appliance's cord for any frays or exposed wires. If the issue persists, it's critical to engage a professional electrician from TNS Electrical Solutions in Putney to conduct a thorough assessment and ensure your safety.

Contact Your Electrician in Putney Today!

While these DIY troubleshooting tips can help you address common electrical issues in your Putney home, electrical systems are complex and can pose serious risks if mishandled. If you encounter persistent problems or feel uncertain about dealing with electrical repairs, it's advisable to seek professional assistance from certified electricians like us at TNS Electrical Solutions. Your safety and peace of mind are our priorities.

  • Phone: 020 3715 2919

  • Address: Suite 30, Parsons Green, 27 Parsons Green Ln, London SW6 4HH

Message Us On Social Media:

Instagram: @tnssolutions

5 views0 comments
bottom of page